A head gasket is a hard machine-like seal between engine blocks and cylinder head that stops gas and fluids from spilling out when under compression. A blown head gasket can result in many complications, including engine malfunction and oil leakage. On top of that, fixing such issues may be a challenge for some vehicle mechanics. If you find one who can do the work, it will be pocket-draining on your side, and it may not be fully effective if the damage is intense.
A cheaper alternative answer to the problem will be ideal in this situation; look for a proven liquid solution instead. Here is why you should opt for this proven solution over other head gasket repair alternatives.
A Steel Solution
Steel solution is proven effective and durable compared to many head gasket repair options. The good thing about this liquid solution is that it is a DIY repair. The mixture contains some chemicals that provide a steel-strong adhesive if consolidated under the right circumstances.
Once you apply the solution and start the engine and it hits operating temperature, the solution is spread to all the engine parts. The solution reaches the damaged area and seals it in a thermo-chemical binding action.
Smooth and Clear Formula
Many people would worry about using a head gasket repair that will not clog the engine’s cooling system; not this time. The steel solution is clear and has no coarse materials or fragments that can block the pathways of the engine coolant.
If you want to repair your head gasket in a permanent, cost-effective way, consider the liquid solution. Here are the reasons why.
It Is Long Lasting
It is best to choose a permanent head gasket repair for your automotive. While some will need frequent reapplication, the steel solution is proven permanent under a typical operating environment. Although you might experience leakage in other parts of the engine, the one treat with this solution will not leak again. Therefore, please shy away from extravagant repairs that will send you back to the mechanic over and over again.
No Need for Healing Time
Most head gasket repairs have an average activation time before you can drive the vehicle. Check the time required to cure as indicated on the container to repair yourself. While most sealants need one hour or longer, any engine treated with this solution does not have a particular treatment time for the procedure. All you need is to run the engine for approximately half an hour once it reaches the operating temperature.
It Is Easy to Use
Head gasket sealants have varying complexities, which is why you can perform some by yourself while a mechanic will be necessary with others. However, the steel solution is the easiest to use with a simple procedure.
- Let the engine cool down, then remove the radiator stopper. Pour the solution into the radiator and close. Ensure you have the coolant in place before proceeding.
- Stop the automotive and allow it to cool down. Start the heater fan to the maximum and start the engine. Run it to operating temperature, about 15-25 minutes. Fill with antifreeze as needed to tighten the cap.
- Drive your vehicle usually.
The Bottom Line
There are various products in the market for head gasket repair, but not all of them will serve you right. You deserve a permanent solution to your pocket-friendly problem, which is why you should consider going for this proven solution.