In order to make a twin bed frame with storage in a short period of time, you can go for DIY crafts of woods. It is easy to make. You can get the instructions by searching on online platforms such as YouTube tutorials. But in case you want a permanent and durable wooden frame for twin bed storage, you can check this article. Here you will get all the necessary instructions on how to build a twin bed frame with storage.
Twin Bed Frame With Storage
Making a durable wooden twin bed frame with storage needs a proper plan. You have to sketch your own plan about what materials and tools you will use, how much you want to cost for the necessary things, what steps you will follow to build your twin bed storage frame, and many more.
The plan is very important in this case. You might think that you can do it without any pre-planning, but it is totally wrong. Because if you would not do everything in the right way, your storage frame might not become as durable as you want. So, it is safer to make a pre-plan and execute accordingly.
Here, you will get to know about all the necessary details like tools, materials, measurements, and steps for making an ideal twin bed frame with storage. The same instructions you can apply for a minimalist bed frame with storage, but there might be a slight change in the measurement section.
Tools and Materials You Need
Tools and materials are the most important things for your twin bed storage frame. Make sure you have all the necessary tools and materials that contain good quality. Tools that you need for your frame include:
- Tape measure
- Miter saw
- Safety gloves
- Safety glasses
- Spirit level
- Chalk line
- Drill machinery
- Carpentry pencil
- Drill bits
For making a wooden frame, you must need woods, no doubt at all. Apart from this wood, other necessary materials that you need involve—
- Storage units
- Foot storage
- Pocket screws
- Brad nails
Measurement is one of the most notable and essential things in case of any making. Whatever you make or build, if your measurement is not perfect, the whole work will go in vain. The case is the same as your wooden twin bed frame with storage. For your perfect frame, here we share the measurements of an ideal twin bed storage frame.
- For the storage unit, you need 10 pieces of 3/4″ plywood of three different lengths, 4 pieces of 15”×15”, 2 pieces of 12 ¾”×15” and another 4 pieces of 15”×59 ½”.
- For backs, you need 3 pieces of 1/4″ plywood of two different lengths. 2 pieces of 15×61” and 1 piece of 15”×40 ½”.
- For the frame, you need total 15 pieces of lumber(1/4). 13 pieces are 7” long, and 2 pieces are 61” long.
- For support, you again need 1 piece 3/4” plywood of 61”×8 ½” length.
- Again you need 5 pieces of 3/4″ plywood of different lengths. 2 pieces of 14 ¼”×15”, 2 pieces of 39”×14 ¼” and 1 piece of 12 ¾”×14 ¼” length.
- Pocket screws of 11/4” length
- Brad nails of 11/4” length
- For trims, you need 6 lumbers
- You might need some other plywood and lumber pieces—measurements of those pieces you have to decide as per your need.
Building A Twin Bed Frame with Storage
You can build a twin bed frame with storage in four easy steps. We have discussed the steps below.
Now the building process of your twin bed storage frame. At the very beginning, you have to make up your storage units of the side portions. Use the 3/4” plywood pieces for these portions and use a drill for the pocket holes in all sides of the wooden pieces. Set the corners into right positions and attach screws to them for a stiff figure. In the joint parts, use glue to attach them tightly.
Now use 1/4″ plywood pieces for the back storage units. Ensure attaching all the ends perfectly and insert galvanized mucilage or glue for attaching the corners. Next, you have to make your trims attached to the storage units of the sides that you have made already. Make sure there is no gap between your trims.
Once you have made the two bedsides, attach them together. Use glue and drills where you need. Now keep your frame placed under the top corners of your storage units. This is the time to make your foot storage. For making this, follow the measurements mentioned above and make the components attached tightly.
Finally, make the back part of the storage by attaching the back frame. Inspect all the corners and components, whether they are perfectly attached or not. Use screws and nails where needed. And see, your twin bed storage frame is ready to use. Garnish and furnish the storage as you like.
So, probably now you have learned how to build a twin bed frame with storage. Follow the measurements and instructions and make your own storage frame easily. For better results, use as many wood coats and wood stains as you can for your wooden components. Try to fill out all the holes using wood filler and after finishing the storage building, smoothen all the corners carefully.